Mueller Co. 3-12 INCH T-2361 TAPPING VALVE MJXFL

  • Description
  • Models
  • Resources

Description

3-12 INCH T-2361 TAPPING VALVE

SPECIFICATIONS:

  • Sizes – 3 “, 4”, 6 “, 8”, 10 “, 12”
  • Meets or exceeds all applicable requirements of the ANSI / AWWA C515 standard, certified according to ANSI / NSF 61 and 372 standards, UL approved 262, FM approved 1120/1130
  • The inlet flange complies with ASME / ANSI B16.1 Class 125 drilling and with MSS SP-60
  • The mechanical seal outlet complies with the ANSI / AWWA C111 standard
  • Iron body with internal and external surfaces coated with
  • Fusion Bond epoxy of nominal 10 mils
  • The epoxy coating meets or exceeds all applicable requirements of the ANSI / AWWA C550 Standard
  • Iron wedge, symmetrical and completely encapsulated with molded rubber; without exposed iron
  • Non-rising stem (NRS)
  • Triple gland with O-ring (2 above the thrust collar and 1 below)
  • 2 “square key nut (available with optional handwheel) – open to the left or open to the right
  • Maximum working pressure of 350 psig (2400 kPa / 24 barg), static test pressure of 700 psig (4800 kPa / 48 barg)
  • Approved by UL / Approved by FM 350 psig (2400 kPa / 24 barg)
  • Designed for potable water applications

OPTIONS:

  • Position indicators
  • Stainless steel shank: type 304 and type 316
  • ASTM B98-C66100 / H02 axle of low zinc and silicon bronze
    Steering wheel
  • EPDM disc and o-rings

CATALOG NUMBERS:

  • T-2361-16 mechanical joint x flanged ends (with mechanical joint unassembled accessories)
  • T-2361-19 mechanical joint x flanged ends (less mechanical joint accessories)