Mueller Co. 14-16 Inch A-2361 RWGV SLXFL

  • Description
  • Models
  • Resources

Description

14-16 Inch A-2361 RWGV SLXFL

SPECIFICATIONS:

  • Sizes – 14″, 16″
  • Meets or exceeds all applicable requirements of ANSI/AWWA C515 Standard, UL 262 Listed, FM 1120/1130 Approved, and certified to ANSI/NSF 61 & 372
  • Slip-on ends fit plain end of classes 50 and 100 cast iron; ductile iron and AWWA C905 cast iron O.D. PVC
  • Flanged end drilling complies with ASME/ANSI B16.1 class 125 and B16.42 class 150
  • Ductile iron body and bonnet with nominal 10 mils Pro-Gard® Fusion Bonded Epoxy Coating interior and exterior surfaces
  • Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard.
  • Ductile iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron
  • Non-rising stem (NRS)
  • Triple O-ring seal (2 above the thrust collar and 1 below)
  • 2″ square wrench nut – open left or open right
  • 250 psig (1725 kPa/17 barg) maximum working pressure, 500 psig (3450 kPa/35 barg) static test pressure
  • UL Listed, FM Approved – 250 psig (1725 kPa/17 barg)
  • Designed for potable water application

OPTIONS*:

  • Position indicators
  • Low zinc, silicon bronze ASTM B98-C66100/H02 stem
  • Handwheel
  • Stainless Steel stem: Type 304, Type 316
  • EPDM disc and O-rings

CATALOG NUMBERS:

  • A-2361-41 Slip-on† end (with gasket) x flange end
  • A-2361-43 Slip-on† end (less gasket) x flange end